Model

UPS configuration technique specification (on telephone handling status)

Continuous input power rate

CP150

CP150L

CP150LH-350W

CP150LH-400W

CP150LH-600W

200VA

360VA

600VA

650VA

1000VA

Maximum output power rate

120W

220W

350W

400W

600W

Input technique indicators

Input voltage

165-275V

Input frequency

45-65Hz

Output technique indicators

Output voltage

220VAC±10%

Output frequency

Same as commercial when on commercial power, 50Hz±1% on inverter status

Output waveform

Sine wave when on-line, square wave on inverter status

Battery (optional)

Battery type

Maintenance free sealed lead-acid battery

Battery inside the cabinet

65AH

(1pcs)

100AH

(1pcs)

100AH

(1pcs)

100AH

(2pcs)

120AH

(2pcs)

120AH

(2pcs)

120AH

(2pcs)

Charging time

6 hours to 90%

8 hours to 90%

8 hours to 90%

12 hours to 90%

12 hours to 90%

12 hours to 90%

12 hours to 90%

Backup time

(fully loaded)

6 hours

8 hours

8 hours

8 hours

6 hours

8 hours

6 hours

Battery testing

Alarm on and automatic turndown when low battery or irregular battery malfunction

Protection functions

Commercial power voltage slump protection

When commercial power voltage is lower than 165VAC, the inverter will start up.

Commercial power surge protection

When commercial power voltage is higher than 275VAC, the inverter will start up.

Commercial power distortion

Waveform distortion ≤10%

Battery over-discharging protection

Automatic turn-off protection at preset voltage value, automatic restart when commercial power recovers regular

Short circuit protection

Output current restraint

Overload protection

Turning down the output voltage according to the magnitude of overload. Once the load is regular, the output voltage will return to regular too.

Transfer time

≤10ms

Working state display

Commercial power status lamp to display commercial condition, sound alarm can caution inverting status and under-voltage, inverting status lamp displays battery to output inverting condition, battery charging lamp on showing the battery is being charged

Machine structure

Sealed outer case, an integrated design of water-proof, dust-proof, and burglar-proof functions. UPS, battery, and charger in the same cabinet.

Waterproof degree

Complying with GB4208, protection grade 3

Radiation

High-point radiated interference field strength complies with GB9254 when the machine is working properly.

mean-time-to double failure

300000 hours

electric strength

No arcing or over-flash when the input/output and the ground is submitted to a 50Hz/2000V AC voltage for one minute.

drain current to the ground

1mA

insulating resistance

The input/output to ground resistance is larger than 2 ohms when the DC voltage is 500 volts.

Lightning protection

(optional)

Can endure voltage surge of both positive and negative pulse with 5KV amplitude and a waveform of 10/700US for 5 times respectively with a surge to surge interval longer than 1 minute. Can endure voltage surge of both positive and negative pulse with 20KV amplitude and a waveform of 8/20US for 5 times respectively with a surge to surge interval longer than 1 minute.

Environment

Outdoor with water-proof, dust-proof, and burglar-proof functions

Environment temperature

-10-55

Noise level

≤45 dB

Mounting method

Ground or wall type

Dimensions

W×D×Hmm

225×400×500

230×480×800

Remarks

Models with cabinet temperature control feature for cold area are available.